Evaluation of ASCE 7 equations for designing acceleration‐sensitive nonstructural components using data from instrumented buildings     

Hamidreza Anajafi  Ricardo A. Medina 《地震工程与结构动力学》2018,47(4):1075-1094

This study uses instrumented buildings and models of code‐based designed buildings to validate the results of previous studies that highlighted the need to revise the ASCE 7 F_p equation for designing nonstructural components (NSCs) through utilizing oversimplified linear and nonlinear models. The evaluation of floor response spectra of a large number of instrumented buildings illustrates that, unlike the ASCE 7 approach, the in‐structure and the component amplification factors are a function of the ratio of NSC period to the supporting building modal periods, the ground motion intensity, and the NSC location. It is also shown that the recorded ground motions at the base of instrumented buildings in most cases are significantly lower than design earthquake (DE) ground motions. Because ASCE 7 is meant to provide demands at a DE level, for a more reliable evaluation of the F_p equation, 2 representative archetype buildings are designed based on the ASCE 7‐16 seismic provisions and exposed to various ground motion intensity levels (including those consistent with the ones experienced by instrumented buildings and the DE). Simulation results of the archetype buildings, consistent with previous numerical studies, illustrate the tendency of the ASCE 7 in‐structure amplification factor, [1 + 2(z/h)] , to significantly overestimate demands at all floor levels and the ASCE 7 limit of to in many cases underestimate the calculated NSC amplification factors. Furthermore, the product of these 2 amplification factors (that represents the normalized peak NSC acceleration) in some cases exceeds the ASCE 7 equation by a factor up to 1.50.  相似文献   

利用P波接收函数研究青藏高原东南缘地幔转换带结构   总被引：2，自引：0，他引：2       下载免费PDF全文

白一鸣  艾印双  姜明明  何玉梅  陈棋福 《地球物理学报》2018,61(2):570-583

研究青藏高原东南缘的深部结构对于理解印度-欧亚板块的碰撞机理和青藏高原的形成演化具有重要的科学意义.本研究对布设在研究区域内566个固定和流动地震台站的波形资料进行了处理，获得77853条高质量P波接收函数，应用接收函数共转换点（CCP）叠加技术获得了研究区域下方精细的地幔转换带间断面起伏形态及转换带厚度变化图像.结果表明：研究区域南北方向上具有两个明显的转换带增厚异常区，南侧异常区位于滇中次级块体与印支块体下方，可能是新特提斯洋板片与上部印度板块间断离并部分滞留在转换带底部的结果；北侧川西地区异常增厚可能与上方岩石圈拆沉并降至转换带有关；腾冲火山起源可能是板块俯冲过程中发生断离造成软流圈物质部分熔融，湿热物质上涌所致.  相似文献   

绝对重力仪的自由落体凸轮驱动器设计与仿真     

张黎  邹彤  蒋冰莉 《大地测量与地球动力学》2018,38(1):102-105

提出一种适合绝对重力仪的凸轮驱动器设计方法，研究了具体运动过程，基于自由落体运动得到凸轮驱动器的运动曲线，并采用SolidWorks进行仿真验证。结果表明，该设计方法可以解决绝对重力仪的自由落体凸轮驱动器设计实现问题。  相似文献   

青藏高原岩石圈三维电性结构   总被引：3，自引：0，他引：3       下载免费PDF全文

杨文采  金胜  张罗磊  瞿辰  胡祥云  魏文博  于常青  于鹏 《地球物理学报》2020,63(3):817-827

本文报道通过综合大地电磁调查数据研究青藏高原岩石圈三维电阻率模型的初步成果.大地电磁法调查区域已经覆盖了高原大部分面积,为全区三维电阻率成像研究打下了可靠的基础.对多个测区大地电磁数据进行精细的同化处理和反演成像,取得了青藏高原可靠的岩石圈三维电阻率结构图像.成像的区域为28°N—35°N,80°E—104°E.三维反演计算时采用的网格尺寸为20km×20km,垂直方向不等间距剖分为26层.结果表明,青藏高原现今岩石圈电阻率扰动主要反映印度克拉通对亚欧大陆板块俯冲引起的热流体运动和大陆碰撞和拆离产生的构造.在岩石圈地幔,察隅地块、喜马拉雅地块和拉萨地块东部联成统一的高电阻率地块,它们反映了向北东俯冲的印度克拉通.雅鲁藏布江、班公—怒江和金沙江缝合带都有明显的低电阻率异常,表明岩石圈深处有热流体活动.雅鲁藏布江、班公—怒江和金沙江缝合带都有明显的低电阻率异常,也表明它们的岩石圈还有流体活动.青藏高原东部的低阻区沿100°E向地幔下方扩大,反映了金沙江断裂带有切穿岩石圈的趋势.地幔电阻率平面扰动的模式显示,青藏高原东西部的地体碰撞拼合形式和方向是不同的.在青藏高原西部,羌塘、拉萨和喜马拉雅等地体从北到南碰撞拼合.在青藏高原东部,羌塘—拉萨、察隅、印支、雅安和扬子等地体多方向拆离拼合,在地壳造成不正交的拆离带和压扭构造系.从高阻-低阻区的分布看,东部的地体拼合有地幔的根源,今后还会进一步发展.察隅地块岩石圈对青藏高原东部的楔入,使其北部和东部地块的岩石圈发生拆离撕裂,也造成热流体上涌的低电阻率异常.  相似文献   

一种实时场地校正方法及其在地震预警中的应用     

王辅臣  马强  陶冬旺  刘赫奕 《地震工程与工程振动》2020,(1):171-184

地震预警系统对地震数据处理的实时性要求极高。其系统数据来源除布设在基岩的测震台站外,还有大量非基岩场地的强震动台站和地震烈度仪台站,其场地影响不容忽视。为了考虑震级估算和地震动场预测中的场地影响,需实时对各种场地条件下的地震波形进行校正。目前处理一般使用某个标量来表征场地放大效应。本文采用一种实时的场地校正方法,首先计算目标场地与参考场地的谱比,然后通过最小二乘法、双线性变换将谱比转化为因果递归的无限冲激响应(IIR)时域滤波器,之后可以应用该滤波器进行实时场地校正。该方法考虑了场地放大系数的频率依赖性,相比于标量校正提高了准确度。应用我国四川和日本部分强震动台站记录,验证并讨论了这种实时场地校正方法在地震预警中的应用效果。  相似文献   

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

利用跨断层形变资料研究天山中段断层现今活动特征     

韩桂红  滕海涛  高歌  李桂荣  张治广 《大地测量与地球动力学》2019,39(1):72-76

利用2001年以来天山中段多个跨断层形变场地的测量资料，从断层运动方向和断层平均速率2个方面分析天山中段3条断层现今活动特征。结果表明，霍玛吐断裂呼图壁段断层的活动性质为正、逆断和左、右旋交替活动；北轮台-辛格尔断裂库尔勒段断层表现为右旋运动特征，活动性质为逆断性；妖魔山F2断裂乌鲁木齐段的断层活动性质以逆断为主。妖魔山F2断裂乌鲁木齐段断层的活动程度最高，霍玛吐断裂呼图壁段最低。霍玛吐断裂、北轮台-辛格尔断裂、妖魔山F2断裂垂直方向上基本均处于张性变化，前两者水平向处于挤压状态；断层活动速率的时间进程具有阶段性特征，各个时间段转折点有较好的匹配性。  相似文献   

Threshold of motion of bivalve and gastropod shells under oscillatory flow in flume experiments     

Cristiano Fick  Eduardo Puhl  Elírio Ernestino Toldo Jr 《Sedimentology》2020,67(1):627-648

The threshold of motion of non-fragmented mollusc shells was studied for the first time under oscillatory flow. In this regard, flume experiments were used to investigate the threshold of motion of three bivalve and three gastropod species, two typical mollusc classes of coastal coquina deposits. The sieve diameters ranged from 2·0 to 15·9 mm. These experiments were performed on a flat-bottom setup under regular non-breaking waves (swell) produced by a flap-type wave generator. The critical Shields values for each species of mollusc were plotted against the sieve and nominal diameter. Moreover, the dimensionless Corey shape factor of the shells was evaluated in order to investigate the effect of mollusc shell shapes on the threshold of motion. According to their critical Shields parameter, the mollusc threshold data under oscillatory flow present smaller values than the siliciclastic sediments when considering their sieve diameter. In addition, the mollusc datasets are below the empirical curves built from siliciclastic grain data under current and waves. When considering the nominal diameter, the critical Shields parameter increases and the mollusc data are closer to siliciclastic sediments. Bivalves, which have a flat-concave shape (form factor: 0·27 to 0·37), have a higher critical Shields parameter for smaller particles and more uniform datasets than the gastropod scattered data, which have a rounded shape (form factor: 0·58 to 0·62) and have varied morphologies (ellipsoidal, conical and cubic). The comparison between previous current-driven threshold data of bioclastic sediment motion and the data of mollusc whole shells under oscillatory flow shows a fair correlation on the Shields diagram, in which all datasets are below the mean empirical curves for siliciclastic sediments. These findings indicate that the shape effect on the transport initiation is predominant for smaller shells. The use of the nominal diameter is satisfactory to improve the bioclastic and siliciclastic data correlation.  相似文献   

2018年2月12日河北永清4.3级地震强震动记录分析     

郭秋娜  温超  周月玲  李姜 《震灾防御技术》2020,15(2):329-338

2018年2月12日河北省廊坊市永清县发生4.3级地震，震中位于廊固凹陷内的河西务断裂附近，国家强震动台网中心获取74组强震动记录，本文对触发台站进行场地分类，结果显示大部分为Ⅰ类场地(51.35%)，其次为Ⅱ类场地(35.14%)和Ⅲ类场地(13.51%)。根据5个典型台站加速度时程记录及反应谱分析本次地震强震动特征，并对各台站峰值加速度反应谱与方位角和震中距的关系进行分析。采用克里格插值方法绘制地震仪器烈度分布图，由于台站分布不均，导致极震区附近烈度影响场计算缺值现象，本文通过拟合本次地震强震动记录得到该地区地震动衰减关系，在空白区域建立空间随机假设台站进行补点插值，解决了计算缺值问题，为缺少台站记录的震区提供准确快速制作烈度分布图的思路，为震害调查和地震应急救援提供重要依据。  相似文献   

Truss Spar平台在波流联合作用下运动响应预报方法比较     

许国春  石凡  刘肖佐  朱克强 《海洋工程》2019,37(3):102-110

基于细长体水动力模型比较了Truss Spar平台在波流联合作用下运动响应预报的三种方法。分别采用波流耦合、速度叠加及力叠加计算Truss Spar平台在波流联合作用下的水动力载荷,根据流场水质点运动规律和Truss Spar外部形状特点,分段高效计算水动力载荷。利用Runge-Kutta-Fehlberg方法求解刚体非线性运动方程得Truss Spar在波流场中的运动响应。研究结果表明力叠加法所预报的Truss Spar纵荡和纵摇运动明显大于其他两种方法的相应运动响应预报结果,而波流耦合法与速度叠加法所预报的纵荡与纵摇运动响应幅值相当,三种方法所预报的垂荡运动响应的大小取决于具体波流参数。  相似文献